Hot 
Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi S, N and X30 Velux (except Ur-Velux) moped / moped.
The wheel hub is from new production.
The brake anchor plate was produced again in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with deep groove ball bearings and an M11 axle.
The 36 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing them with a high-quality alternative from the accessories range.
Details
| Manufacturer | LELEU |
| Ø drum | 80 mm |
| Material | Aluminum |
| Axle length | 160 mm |
| Ø outside | 115 mm |
| Ø axle | 11 mm |
| Number of spoke holes | 36 pcs |
| Thread type | MF11x1 (fine pitch thread) |
| Ø spoke hole | 3.7 mm |
Suitable for the following models
| Puch |
Accessories & related products
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Ø drum: 80 mm · Ø axle: 12 mm · Ø outside: 115 mm · Total length: 185 mm · Color: silver · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Width: 105 mm · Ø bolt circle: 105.5 mm · Thread length: 12 mm · Thread length: 17 mm · Number of spoke holes: 36 pcs · Thread length: 43 mm · Number of fixing points: 6 pcs · Area of application: Standard · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
EUR 106.80
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 3.15
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.70
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
EUR 11.20
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.20
EUR 24.89/l
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing type: Deep groove ball bearing · Stock number: 6001 · Ø inside: 12 mm · Ø outside: 28 mm · Width: 8 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Area of application: Standard
EUR 6.65
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: raw · Quantity: 36 pcs · Length from hook: 188 mm · Nominal diameter (thread): 3.15 mm · Color: silver · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Thread length: 11 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 61.80
Collection only possible with online purchase and appointment.
