Simple, chrome-plated tail light in "old-school design". Very similar to the old Hella, ULO or CEV rear lights.
Three plastic dots are attached to each side, through which the light shimmers.
Total height: 115 mm
Total width: 60 mm
Depth: 50 mm
Screw spacing: 57 mm
Fixing thread: M6
Cable assignment:
Ground: screw connection
Rücklight: yellow
Brake light: red
The rubber base is already fitted.
The glass is embedded in an aluminum socket.
Two threaded bulbs are already installed (6V 3W / 6V 5W).
You can find suitable replacement bulbs in the accessories section.
Details
| Manufacturer | GPO |
| Material | Aluminum |
| Test mark | none |
| Color | red, Chrome |
| Bulb holder | E10 |
| Height | 115 mm |
| Number of fixing points | 2 pcs |
| Depth | 50 mm |
| Width | 60 mm |
| Mounting type | Nuts & bolts |
| Brake light | Yes |
| Battery operated | No |
| Reflectors | Yes |
Accessories & related products
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Total length: 15 mm · Thread length: 7 mm · Width across flats SW: 7 mm
EUR 2.80
swiing® revival 17" rear fender Inox | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Mounting type: Nuts & bolts
EUR 42.80
Magura set screw M6x34 mm lock nut SW8
Slotted: No · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Total length: 34 mm · Thread length: 24 mm · Ø Receptacle: 7.05 mm
EUR 2.80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
EUR 11.20
Collection only possible with online purchase and appointment.
