Aluminum stroke plate for your Zündapp Belmondo, Bergsteiger moped / moped with type 247 engine.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original squish edge dimension and compression ratio are maintained.
Material thickness (selection): 0.5 / 1.0 / 1.5 / 2.0 mm
Material: aluminum
Ø cylinder neck: 50 mm
Number of attachment points: 4 pieces
Matching cylinders, sealant and alternative stroke plates in various thicknesses can be found in the accessories section.
Exclusive product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Area of application | Tuning |
| Surface | raw |
| Material | Aluminum |
| Ø cylinder | 50 mm |
| Place of use | Cylinder base |
| Thickness | 0.5 mm, 1 mm, 1.5 mm, 2 mm |
Suitable for the following models
| Zündapp Belmondo | |
| Zündapp |
Accessories & related products
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger M25, M50 (Type 247)
Nominal diameter: 39 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 42 mm · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Camouflaged: No · Thread inlet: M6x1 (standard thread) · Decompressor: No · Number of fixing points: 4 pcs · Outlet type: slanted · Thread outlet: M6x1 (standard thread)
EUR 257.50
swiing® ingenious 44 mm cylinder kit tuning with head | Zündapp Bergsteiger M25, M50 (Type 247)
Nominal diameter: 44 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 42 mm · Displacement: 65 ccm · Camouflaged: No · Thread inlet: M6x1 (standard thread) · Decompressor: No · Number of fixing points: 4 pcs · Outlet type: slanted · Thread outlet: M6x1 (standard thread)
EUR 274.60
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Temperature resistance (min.): -60 - 300 °C · Area of application: Chemistry · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Color: red · Gap dimension (max.): 2 mm
EUR 26.20
Not in stock
EUR 374.29/l
swiing® ingenious lifting plate 2 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Area of application: Tuning
EUR 22.80
swiing® ingenious lifting plate 1.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Area of application: Tuning
EUR 22.80
swiing® ingenious lifting plate 1 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Area of application: Tuning
EUR 22.80
swiing® ingenious lifting plate 0.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Area of application: Tuning
EUR 22.80
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.30
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11.30
EUR 25.11/l
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Total length: 35 mm · Number of fixing points: 2 pcs · Ø inside: 16 mm · Ø External connection: 23 mm · Hole spacing inlet: 40 mm · Total height: 42 mm · Height flange center hole: 35 mm · Mounting type: Screws · Camouflaged: No
EUR 45.70
Collection only possible with online purchase and appointment.
