swiing® ingenious suction funnel Ø 61 mm Dell'Orto PHBG

Dell'Orto 19 mm PHBG CS carburetor hand choke

Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Nominal diameter: 19 mm · Carburetor type: PHBG CS · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 82 mm · Width: 70 mm · Height: 124 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Color: black · Choke nozzle size: 60 · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45

Dell'Orto 21 mm PHBG DS carburetor - Black Edition

Total length: 86.6 mm · Width: 51.2 mm · Height: 134 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Surface: varnished · Area of application: Tuning · Nominal diameter: 21 mm · Carburetor type: PHBG DS · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 21.2 mm · Ø Output inside: 28.3 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection · Mixed oil connection: Yes · Vacuum connection: Yes · Color: black · Nozzle size: 92

Dell'Orto 21 mm PHBG DS carburetor cable choke - Red Edition

Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Surface: varnished · Area of application: Tuning · Nominal diameter: 21 mm · Carburetor type: PHBG DS · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Width: 85 mm · Height: 130 mm · Mounting type: Plug connection · Mixed oil connection: Yes · Choke nozzle size: 60 · Nozzle size: 92 · Size of secondary nozzle: 50

GPO 17.5 mm PHBG AD carburetor cable choke (Dell'Orto replica)

Manufacturer: GPO · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17.5 mm · Carburetor type: PHBG AD · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Width: 75 mm · Height: 130 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Choke nozzle size: 55 · Nozzle size: 80 · Size of secondary nozzle: 50

19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)

Manufacturer: Quenching · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 19.5 mm · Carburetor type: PHBG · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø Inside entrance: 24 mm · Ø Inside entrance: 26 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 70 mm · Width: 60 mm · Height: 132 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Color: black · Choke nozzle size: 53 · Camouflaged: No · Nozzle size: 85 · Size of secondary nozzle: 55

Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50

Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Place of use: Pinion shaft · Surface: rubberized · Area of application: Standard · Ø inside: 17 mm · Ø outside: 28 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C

Oil seal NBR 17/35/7 AS crankshaft | Puch X30

Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 17 mm · Ø outside: 35 mm · Width: 7 mm · Manufacturer: Puch · Place of use: Crankshaft · Material: NBR · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C

swiing® ingenious gasket outlet 28 mm graphite

Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Tuning · Ø inside: 27.4 mm · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm

Siggnature cylinder clamping sleeve 47 mm

Diameter: 47 mm · Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Area of application: Special tool · Ø inside: 24 - 34.2 mm · Number of components: 1 pcs · Total length: 60 mm

BGS plastic scraper set 4 pcs.

Manufacturer: BGS · Material: Polyoxymethylene (POM) · Area of application: Workshop accessories · Number of components: 4 pcs · Total length: 250 mm · Width: 18 mm · Width: 20 mm · Width: 24 mm · Width: 35 mm