Black, front mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A, Puch Sprinter and Puch Supermaxi LG1 / LG2 moped / moped.
Since the front mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. Furthermore, it is still possible to use an edge protector or splash guard flap. Corresponding holes must still be drilled if required.
All original holes are provided for mounting the side and lower mudguard struts.
To mount cable guides, holes are also already incorporated on both sides of the mudguard.
Note: These are B-grade goods. Unfortunately, the mudguards were insufficiently protected during transportation. Therefore, scratches may be present. The black color should therefore be regarded as a primer rather than a final coat of paint. The folded ends may also have been finished a little more beautifully.
Further parts for your wheel fairing, such as paint polish or fastening material, can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Color | black |
| Surface | varnished |
| Folding the ends | closed folded |
| Shape of the mudguard | round |
| Total length over ends | 560 mm |
| Mounting type | Nuts & bolts |
| Scope | 700 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 180 mm |
| Wheel size | 17 " |
| Puch |
Ratings
Accessories & related products
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Mounting type: Nuts & bolts · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 "
EUR 68.70
swiing® revival 17" front fender "Retro" Inox black | Puch X30 NS, NL, NG-2AH, N-2AH, LG1/LG2
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black · Folding the ends: closed folded · Shape of the mudguard: round · Mounting type: Nuts & bolts · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 "
EUR 68.70
GPO mudguard strut front 17" black
Manufacturer: GPO · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Color: black · Total length: 305 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
EUR 17.10
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Wide intake: 115 mm · Hole spacing: 35 mm · Material: Steel · Outer width: 130 mm · Surface: varnished · Color: black · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Wheel size: 17 " · Total length: 270 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm
EUR 22.80
Explore categories from Mudguard
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 11.40
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Chain pitch: 1/2" x 3/16" · Thickness: 4.5 mm · Manufacturer: GPO · Hole spacing: 36.5 mm · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Hole spacing 2: 68 mm · Ø inside: 94 mm · Number of fixing points: 6 pcs · Cranking (offset): 8 mm · Ø mounting hole: 6.7 mm
EUR 22.80
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard
EUR 2.75
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 14.80
Not so nice 
Luggage carrier black | Puch Maxi S
Hole spacing: 29 mm · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Total length: 425 mm · Width: 168 mm · Height: 32 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm
EUR 22.80
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Hole spacing: 410 mm · Material: Steel · Surface: varnished · Color: black · Total length: 420 mm · Width: 170 mm · Height: 35 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø outside: 12.5 mm · Ø mounting hole: 8.1 mm
EUR 34.30
GPO mudguard strut front 17" black
Manufacturer: GPO · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Color: black · Total length: 305 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
EUR 17.10
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Wide intake: 115 mm · Hole spacing: 35 mm · Material: Steel · Outer width: 130 mm · Surface: varnished · Color: black · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Wheel size: 17 " · Total length: 270 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm
EUR 22.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
