A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Nominal diameter | 17 mm |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRF |
| Mounting type | Plug connection clamped |
| Ø Internal connection | 23 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 60.2 mm |
| Ø fuel hose connection | 6 mm |
| Choke control | Hand choke |
| Area of application | Tuning |
| Nozzle thread | M4x0.7 (standard thread) |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Ratings
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 31.60
Inox
Hot 
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Color: Chrome · Surface: chrome-plated · Thread size: M8 · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread type: M8x1.25 (standard thread) · Total length: 360 mm
EUR 32.00
swiing® revival nozzle set M4 (70 - 90) Bing 18, Bing 85
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90
EUR 25.10
66HEROES Air filter mushroom grille black Dell'Orto SHA (Ø=60 mm)
Manufacturer: 66HEROES · Material: Metal · Camouflaged: No · Material: Rubber · Filter type: Grille · Color: black · Ø outside: 87 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length rubber part: 18 mm · Ø Internal connection: 60 mm · Length of filter section: 28 mm · Total length: 46 mm · Area of application: Tuning
EUR 22.80
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Ø inside: 17.8 mm · Ø External connection: 20 mm · Mounting type: Stud bolt · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 55 mm · Height flange center hole: 45 mm · Total length: 65 mm · Area of application: Tuning
EUR 85.90
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø inside: 17 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 73 mm · Height flange center hole: 61 mm · Total length: 45 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 57.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
