Reduction sleeve to reduce the 24 mm CP carburetor of your Piaggio Vespa moto scooter to 22 mm.
By reducing the intake cross-section, the flow velocity is changed, which results in a noticeable improvement in the response behavior in the lower speed range and makes tuning easier over the entire speed range.
| Manufacturer | Bollag Motos |
| Material | Adhesive |
| Color | white |
| Ø inside | 22 mm, 21 mm |
| Ø External connection | 25.9 mm |
| Total length | 16 mm |
| Mounting type | inserted |
Ratings
Accessories & related products
Bollag Motos carburetor Polini CP23 without choke | Vespa Wideframe VB1
Nominal diameter: 19 mm · Manufacturer: Bollag Motos · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Width: 66 mm · Total length: 73.5 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Nozzle size: 66 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Ø Air filter connection: 46 mm · Height: 135 mm · Ø Internal connection: 19.8 mm · Nozzle block: 35-12 · Size of secondary nozzle: 38 · Size of secondary nozzle: 40 · Size of secondary nozzle: 42
EUR 200.40
Not in stock
Moped fans also bought
Magura adjusting screw brake long
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 47 mm · Total length: 65 mm · Drive: Knurled screw · Color: silver · Ø External head: 9.1 mm · Ø shaft: 6 mm · Shank length: 11 mm · Thread length: 24 mm
EUR 4.45
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.30
Collection only possible with online purchase and appointment.
