Unique racing exhaust with offset silencer suitable for various Puch mopeds.
The exhaust is characterized by its very high-quality workmanship and is sometimes referred to as one of the most powerful racing exhausts for Puch racing mopeds.
The special feature of this Homoet model is that the center section is slightly longer, resulting in more power.
Ideal for cylinder kits between 38 and 42 mm. The tuning exhaust can only be fitted to cylinders with a straight outlet.
HOMOET DEMPER exhaust system made by hand in the Netherlands.
Manufacturer | HOMOET |
Material | Steel |
Flame tube attachment | Flange |
Number of fixing points | 1 pcs |
Exhaust type | Cone / double cone |
Mounting type | Welded lug |
Puch | E50 |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Thickness: 3 mm · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
EUR 8.45
Moped fans also bought
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Width: 150 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Color: Chrome · Ignition system: DUCATI · Color: black-matt · Height: 88 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Total length: 160 mm · Hole spacing: 137.5 mm
EUR 171.30
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 14.70
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Color: Chrome · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Total length: 180 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 85.60
Road Master 2.25 x 17" F-323 4.P.R. Allround
Manufacturer: Road Master · Tire width [inch]: 2.25 " · Width [inch]: 2 1/4 · Color: black · Old designation: 21 x 2.25 · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4.P.R. · Tire type: Allround · White wall: No · Wheel size [inch]: 17 " · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 34.20
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Width across flats SW: 13 mm · Width across flats SW: 17 mm · Ø External head: 14 mm · Manufacturer: GPO · Number of components: 3 pcs · Material: Chrome steel (known as Nirosta®) · Total length: 32 mm · Ø shaft: 9.8 mm · Drive: Outer edge · Shank: Yes · Shank length: 9.5 mm · Thread length: 13 mm · Area of application: Standard · Thread type: MF10x1 (fine pitch thread)
EUR 14.70
Jammer racing clutch special 65 ccm and more | Puch E50
Material: Steel · Thickness: 19 mm · Manufacturer: Jammer · Ø outside: 92.5 mm · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
EUR 217.00
Not in stock