Wheel axle with closed groove ball bearings (Ø 29 mm) for the rear spoke wheel on your Puch moped / moped.
The rear wheel axle includes all required washers, nuts and spacers.
The dimension of the long spacer is 78.5 mm.
- green cable tie: brake anchor plate
- Blue cable tie: swingarm
- Red cable tie: wheel hub
Note: When mounting the ball bearings, make sure that the long spacer bush is clamped between the two bearings without any play. This is the only way to ensure that the inner rings of the bearings press correctly onto the bushing. If this is not observed, the bearings will inevitably become distorted.
| Manufacturer | swiing® ingenious parts |
| Diameter | 29 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 19 mm |
| Total length | 190 mm |
| Ø inside | 12 mm |
| Width across flats | 19 mm |
| Shank length | 100 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Ø outside | 29 mm |
| Ball bearing closed | Yes |
| Thread length | 29 mm, 53 mm |
| Puch |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Width across flats: 19 mm · Drive: External hexagon · Height: 10 mm · Thread depth: 10 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Area of application: Standard
EUR 2.30
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width across flats: 19 mm · Ø outside: 29.02 mm · Ø shaft: 11.95 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Ball bearing closed: Yes
EUR 44.90
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 9 mm · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Ø outside: 29.02 mm · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Width: 9 mm · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Ball bearing closed: Yes
EUR 10.30
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 7.95
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
EUR 11.40
Fortune / Merrick 2.00-2.50 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 16 - 17 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve
EUR 11.40
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width across flats: 19 mm · Ø outside: 29.02 mm · Ø shaft: 11.95 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Ball bearing closed: Yes
EUR 44.90
Hot 
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
EUR 11.40
swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Total length: 165 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Height: 5.9 mm · Height: 9.9 mm · Shank length: 74.5 mm · Thread type: MF12x1 (fine pitch thread) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 34.5 mm · Width across flats: 19 mm · Ball bearing closed: Yes · Thread length: 40.5 mm · Thread length: 50 mm
EUR 44.90
Collection only possible with online purchase and appointment.
