Set of galvanized M6 threaded stud bolts with increased strength and 1D nuts for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small engine bikes (Puch, Sachs, Zündapp, etc.).
These stud bolts can also be used with Sachs engines when mounting a lift plate. The original cylinder stud bolts are usually too short.
Total length: 30 mm
Thread length: 12 / 12 mm
Strength of stud bolt: 10.9
Strength nut: 8
Material: Steel, galvanized
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Diameter | 6 mm |
| Total length | 30 mm |
| Drive | External hexagon |
| Thread type | M6x1 (standard thread) |
| Thread length | 12 mm |
| Width across flats SW | 10 mm |
| Strength class | 10.9, 8 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24.70
EUR 2’470.00/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 38 mm · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
EUR 2.25
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Diameter: 6 mm · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Width across flats SW: 8 mm · Strength class: 10 · Strength class: 12.9
EUR 21.60
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.20
EUR 24.89/l
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 39.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Piston weight: 89 g
EUR 39.30
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 10.00
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 10.00
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Piston weight: 74 g
EUR 44.90
Set
Hot 
swiing 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Manufacturer: swiing · Camouflaged: No · Area of application: Tuning · Material: Gray cast iron · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 40 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm
EUR 180.00
swiing 38 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Manufacturer: Meteor · Manufacturer: swiing · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm
EUR 146.20
Collection only possible with online purchase and appointment.
