Cylinder head gasket made of graphite suitable for your Puch moped, moped or small motorcycle with 70 cc cylinder.
Thanks to the graphite it contains, the cylinder cover gasket has exceptional temperature resistance. It also ensures reliable sealing even at low surface pressures.
| Material | Graphite / Graphite, Aluminum |
| Thickness | 0.5 mm |
| Nominal diameter | 45 mm |
| Ø inside | 45.5 mm |
| Ø cylinder | 45 mm |
| Hole pattern [mm] | 45.5 x 45.5 |
| Place of use | Cylinder head |
| Ø screw holder | 8.2 mm |
| Puch |
Accessories & related products
Airsal gasket set 44 - 45 mm | Puch
Manufacturer: Airsal · Number of components: 4 pcs · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Area of application: Tuning
EUR 11.40
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 26.30
EUR 375.71/l
GPO gasket set cylinder 45 mm Puch
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Tuning
EUR 9.05
Not in stock
BAD ASS Lucifer BigBore cylinder kit Ø 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Material: Gray cast iron · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 49 mm · Ø Outlet outside: 26 mm · Nominal diameter: 45 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Area of application: Tuning · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 mm · Thread outlet: M6x1 (standard thread)
EUR 286.70
Explore categories from Seals & gaskets
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple shape: Pears · Area of application: Standard · Nipple length: 10 mm
EUR 2.75
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Surface: nickel-plated · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.30
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.9 mm · Total length: 106 mm · Drive: External hexagon · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.50
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Place of use: Exhaust · Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8.50
Working late? Evening hours on Thursday until 20:00
