High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Total length | 940 mm |
| Material | Steel |
| Surface | blank |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Mounting type | Nuts |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Total length: 830 mm · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Mounting type: Welded lug · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Ø outside: 95 mm · Flame tube attachment: Flange · Number of fixing points: 1 pcs
EUR 211.30
HOMOET Exhaust P6 Special (longer center section) | Puch
Surface: blank · Manufacturer: HOMOET · Material: Steel · Ø outside: 88 mm · Total length: 935 mm · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange · Number of fixing points: 1 pcs
EUR 337.00
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Surface: raw · Surface: varnished · Manufacturer: HOMOET · Material: Steel · Ø outside: 88 mm · Color: gray · Total length: 900 mm · Mounting type: Tab · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs
EUR 325.50
Not in stock
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Surface: blank · Manufacturer: AKOA · Material: Steel · Total length: 940 mm · Mounting type: Nuts · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Number of fixing points: 3 pcs
EUR 388.40
Moped fans also bought
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Thickness: 3 mm · Area of application: Tuning · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
EUR 8.45
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 1 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.45
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Inlet window: 23 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 114.20
Collection only possible with online purchase and appointment.
