Complete gasket set for engine & cylinder of Sachs 50-AML automatic Saxonette mopeds.
Diaphragm version.
The matching cylinder base gasket for Swiss engines can be found below in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
| Manufacturer | Athena |
| Area of application | Standard |
| Ø outlet inside | 28 mm |
| Hole spacing inlet | 31 mm, 67 - 31 mm |
| Number of components | 9 pcs |
| Hole pattern [mm] | 51 x 40 |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 50/3 50/4 - MLFB (2.6 PS) |
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Stock number: E15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 35 mm · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 28.50
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Width: 7 mm · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Ø outside: 30 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.20
Starter cable Sachs Ø 1.5 mm x 160 cm (P0925)
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Cylinder · Ø nipple: 5 mm · Nipple length: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs
EUR 3.20
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Width: 8 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Stock number: E15 · Area of application: High End · Area of application: Standard · Bearing type: Deep groove ball bearing · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø inside: 15 mm · Ø outside: 35 mm · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 57.10
Oil seal FPM 12.96/31.5/3.5 B 13 mm pinion shaft | Sachs 50/2 (A1137)
Temperature resistance (min.): 200 - 220 °C · Simmering type: B - With sheet metal outer casing / one sealing lip. · Width: 3.5 mm · Manufacturer: Sachs · Material: FPM - Fluororubber · Place of use: Pinion shaft · Surface: raw · Area of application: Standard · Ø inside: 12.96 mm · Ø outside: 31.4 mm
EUR 14.80
Collection only possible with online purchase and appointment.
