Original pole wheel for various mopeds, mopeds and small motorcycles with mechanical breaker ignition and clockwise rotating engine.
The magnetic flywheel can be used for single-automatic engines, e.g. Puch Maxi E50.
Weight: 900 grams
Ø inside: 91.1 mm
Ø outside: 116.5 mm
Matching attachments for the ignition wheel such as ignition plate, interrupter, condenser, ignition coil, ignition plug, etc. can be found in the accessories section.
The following number is stamped on the ignition wheel: 0212124039, 6V22 - 5/10 W
NOS - new from old stock.
| Manufacturer | BOSCH |
| Ø Internal flywheel | 91.2 mm |
| Material | Steel |
| Direction of rotation | right |
| Weight | 900 g |
| Ø cone small inside | 11.9 mm |
| Ø cone large inside | 15 mm |
| Ø Flywheel outside | 115.8 mm |
| Cone length | 17.8 mm |
| Cone ratio | 1:5 |
| Thread type | MF26x1.5 (fine pitch thread) |
| Height | 36.6 mm |
| Thread length | 6.5 mm |
| Puch | E50 |
Accessories & related products
Nut flywheel M10x1 SW15 serrated
Surface: galvanized (blue) · Nut type: Flange nut · Material: Steel · Nominal diameter (thread): 10 mm · Drive: External hexagon · Ø outside: 19.8 mm · Thread type: MF10x1 (fine pitch thread) · Height: 10.5 mm · Width across flats: 15 mm · Area of application: Standard
EUR 3.30
Hot 
BOSCH breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Ø Internal flywheel: 90 mm · Material: Steel · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 22.80
BERU Ignition Interrupter with Cable, NOS | Bosch / Ducati
Manufacturer: BERU · Ø Internal flywheel: 90 mm · Material: Steel · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 34.30
Hot
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Height: 23 mm · Total height: 32 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
EUR 11.40
Hot
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Ø cable holder: 5.9 mm · Place of use: Internal (in the ignition) · Color: black · Ø mounting hole: 4.6 mm · Total length: 76.5 mm · Ø Internal flywheel: 90 mm · Height: 17 mm · Cable length: 37 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Hole spacing: 54 mm · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 114.60
Not in stock
swiing® revival ignition plate 90 mm Bosch / DUCATI
Ø inside: 18.5 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Tension: 6 V · Cable length: 450 mm · Cable length: 550 mm · Number of cables: 3 pcs · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
EUR 126.10
swiing® revival M10x1 SW14 nut, flywheel flange, CNC-machined, original
Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Height: 10 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon · Width across flats: 14 mm · Ø outside: 19.8 mm · Alternative version of the Pony OEM number: A4513 · Alternative version of the Puch OEM number: 901.2943 · Alternative version of the Sachs OEM number: 0942 072 102
EUR 7.90
Moped fans also bought
Hot
Wippermann drive chain No.18 (double reinforced)
Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm · Color: gray · Ø Pin: 4.15 mm
EUR 38.90
swiing® revival side protection screw set black | Puch Maxi N
Manufacturer: swiing® revival parts · Color: black · Material: Plastic · Material: Steel · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 13 mm · Thread length: 50 mm · Total length: 24.5 mm · Total length: 63 mm
EUR 13.70
Working late? Evening hours on Thursday until 20:00
