Muffler
swiing® revival exhaust flute Ø 28 / 60 mm original | Sachs 50/2, 503
Ø outside: 20 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 60 mm · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Flute · Total length: 560 mm · Flame tube attachment: Plug connection clamped
EUR 114.20
Hot 
swiing® ingenious cigar Ø 32 / 70 mm chrome (reso exhaust)
Ø outside: 70 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Cigar · Total length: 730 mm
EUR 114.20
swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust) camouflaged | Sachs
Ø outside: 70 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Total length: 730 mm
EUR 159.90
Hot
swiing® ingenious flute Ø 32 / 70 mm chrome (reso exhaust)
Ø outside: 35 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Flute · Total length: 785 mm · Flame tube attachment: Plug connection clamped
EUR 125.60
Exhaust Boss Demper Ø 28 / 60 mm chrome
Ø outside: 60 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 60 mm · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Total length: 580 mm · Flame tube attachment: Plug connection clamped
EUR 114.20
Exhaust Boss Demper Ø 28 / 60 mm with lug chrome | Puch
Ø outside: 60 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 60 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Total length: 580 mm · Flame tube attachment: Plug connection clamped
EUR 114.20
Rear muffler flute Ø 28 / 70 mm chrome
Ø outside: 70 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Flute · Total length: 700 mm · Flame tube attachment: Plug connection clamped
EUR 67.30
Jamarcol muffler flute Ø 32 / 70 mm chrome
Ø outside: 70 mm · Manufacturer: Jamarcol · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Flute · Total length: 790 mm · Flame tube attachment: Plug connection clamped
EUR 97.00
Not in stock
VOCA silencer black with 3-point mount
Ø inside: 20.3 mm · Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Color: black · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø bolt circle: 46 mm · Total length: 220 mm · Total length: 235 mm
EUR 102.70
Exhaust Boss Demper Ø 28 / 60 mm black
Ø outside: 60 mm · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 60 mm · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Total length: 580 mm · Flame tube attachment: Plug connection clamped
EUR 114.20
Jamarcol muffler cigar Ø 28 / 70 mm chrome | Kreidler
Ø outside: 70 mm · Manufacturer: Jamarcol · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screws · Number of fixing points: 2 pcs · Ø Internal connection: 28 mm · Exhaust type: Cigar · Total length: 700 mm · Flame tube attachment: Plug connection clamped
EUR 57.00
Silencer 22 mm carbon / aramid
Ø inside: 20 mm · Thread type: M8x1.25 (standard thread) · Material: Aramid (known as Kevlar®) · Material: Carbon · Material: Steel · Surface: varnished · Color: graphite colors · Color: yellow · Ø Silencer: 60.5 mm · Number of fixing points: 2 pcs · Total length: 360 mm
EUR 61.60
VOCA silencer red with 3-point mount
Ø inside: 20.3 mm · Manufacturer: VOCA · Thread type: M6x1 (standard thread) · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Color: black · Color: red · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø bolt circle: 46 mm · Total length: 220 mm
EUR 102.70
Exhaust Boss Demper Ø 28 / 60 mm with tab black | Puch
Ø outside: 60 mm · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 60 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Total length: 580 mm · Flame tube attachment: Plug connection clamped
EUR 114.20
Rear muffler flute Ø 28 / 70 mm black
Ø outside: 70 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: varnished · Color: black · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Flute · Total length: 700 mm · Flame tube attachment: Plug connection clamped
EUR 67.30
Page 1 of 2
A new exhaust silencer for your Sachs moped: for repairs or efficient tuning
Original moped exhausts - and this doesn't just apply to the exhaust systems on Sachs 503 mopeds - have the unpleasant habit of starting to rust at some point in most cases. On the one hand, this can spoil the appearance of your lovely Sachs pearl. On the other hand, if the exhaust system is so badly corroded that there are already holes in it, your bike will not only be unpleasantly loud, but optimum exhaust gas routing is no longer guaranteed. At the latest then it is time to fit a new exhaust silencer to your Sachs 503 moped. For the legendary mopeds from the manufacturer in Schweinfurt, you can get everything for the exhaust system from silencers to exhaust clamps from us. Of course, we also offer tuning exhausts for your moped from well-known brands such as Tecno, MLM, Homoet or 66Heroes in our range at a fair price. You can also find custom-fit and easy-to-install exhaust silencers from Proma, GPO or Jamarcol especially for your Sachs moped in our shop.
Muffler installation on your Sachs 503 moped: an easy exercise for passionate mechanics
Fitting a new exhaust to your moped should not be a problem, even if you are a novice mechanic. In addition to the nuts and bolts on the outlet, you only need to loosen the existing exhaust clamps. You can then remove the silencer or the complete exhaust system. Then simply fit the new silencer in reverse order. As almost every muffler you can buy from us is usually designed specifically for your Sachs 503 moped, the fixing points usually remain the same, so you don't have to change anything on site.
From the silencer to the exhaust clamp: brand quality for optimum exhaust routing on your moped
If you opt for a sports or racing exhaust instead of an original exhaust, the new silencer will have a significant effect on the performance of your Sachs moped. This is because such an exhaust silencer optimises the exhaust routing on your moped. A counter-pressure is created in the direction of the exhaust, which can lead to an increase in performance. The effect is all the more sustainable if you modify other parts on your moped, such as the cylinder and carburettor, in addition to the silencer. An optimally tuned and sophisticated setup is the best way to effectively and sustainably increase the performance of your pearl.
Order your new exhaust silencer for your Sachs moped at a fair price from mofakult
If you would like to give your Sachs 503 moped a new silencer, you can order it conveniently, safely and at fair prices in our shop. Exhausts, flame tubes and complete exhaust systems from the first screw to the last exhaust clamp are also available from our own brand swiing with a particularly attractive price-performance ratio. If you don't know which muffler to choose for your Sachs moped, please contact us and we will be happy to help you.
Our favorite manufacturers
Collection only possible with online purchase and appointment.
