Bing SSE 15 mm aftermarket tuning carburetor suitable for ILO / JLO mopeds / mopeds.
The racing carburetor also fits Puch MS, VS, MV and DS small engine bikes, provided the additional flange (item 23645) is used.
If necessary, small adjustments are required to ensure the air filter fits perfectly.
We recommend the adjustable nozzle (item 16038), which allows the fuel/air mixture to be optimally adjusted.
Hole spacing for cylinder connection: 32 mm
Main diameter: 14
You can find the slanted intake manifold described above, other carburetors and the innovative adjustable nozzle in the accessories section.
| Component group Carburetor | Carburetor complete |
| Nominal diameter | 15 mm |
| Area of application | Standard, Tuning |
| Carburetor type | SSE |
| Choke control | Cable choke |
| Hole spacing inlet | 32 mm |
| Ø fuel hose connection | 6 mm |
| Mounting type | Flange |
| Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| ILO / JLO |
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Area of application: Standard · Area of application: Tuning · Choke control: Hand choke · Mounting type: Flange · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Nozzle size: 50
EUR 91.30
BING Original floats Bing SSB, SSE & SSN
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 22 mm · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Height: 23 mm · Color: black · Total length: 41.4 mm · Pony OEM number: A1968 · Sachs OEM no.: 0261 003 001
EUR 33.00
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Total height: 2.7 mm · Total height: 9.7 mm · Area of application: Tuning · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Number of fixing points: 2 pcs
EUR 30.30
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Area of application: Standard · Area of application: Tuning · Choke control: Cable choke · Mounting type: Flange · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Nozzle size: 50 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm
EUR 98.20
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Sealing paper · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
EUR 22.70
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Height: 55 mm · Total length: 135 mm · Ø cylinder: 45 mm · Width: 125 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Decompressor: No · Camouflaged: Yes
EUR 37.60
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Nut type: Hexagon nut 1D · Height: 10 mm · Drive: External hexagon · Thread type: MF10.5x1 (fine pitch thread) · Width across flats SW: 17 mm · Area of application: Standard
EUR 7.90
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Ø inside: 15 mm · Bearing type: Shoulder bearing · Ø outside: 35 mm · Width: 8 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 28.40
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Total height: 2.7 mm · Total height: 9.7 mm · Area of application: Tuning · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Number of fixing points: 2 pcs
EUR 30.30
Collection only possible with online purchase and appointment.
