Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
| Width across flats SW | 17 mm, 15 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Manufacturer | CIF |
| Thread length | 92 mm |
| Ball bearing closed | No |
| Ø shaft | 10.3 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Total length | 200 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Shank length | 14.5 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Puch |
| Sachs |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 25 mm · Thread length: 26 mm · Ø shaft: 11.9 mm · Shank length: 114 mm · Width across flats SW: 19 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm
EUR 16.80
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.00
EUR 2’500.00/l
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Diameter: 17.95 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 50.20
Moped fans also bought
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11.30
Not in stock
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø outside: 19 mm · Height: 12 mm · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm
EUR 9.05
Collection only possible with online purchase and appointment.
