Hot 
High-quality Ø 90x17 mm brake pads with return tension spring for the front and rear drum brake on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect. Due to their uncompromising braking power, these brake pads are primarily used in racing applications.
| Slotted | Yes |
| Manufacturer | swiing® ingenious parts |
| Color | silver |
| Springs included | Yes |
| Ø locating bolt | 10 mm |
| Number of springs | 1 pcs |
| Width | 17 mm |
| Ø drum | 90 mm |
| Area of application | Racing |
Ratings
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Ø outside: 10 mm · Total length: 41.1 - 65 mm · Area of application: Special tool · Surface: galvanized (blue) · Material: Steel · Number of components: 3 pcs · Thread length: 30 mm · Thread type: M6x1 (standard thread) · Width across flats: 8 mm
EUR 19.10
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Ø bore: 4 mm · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm
EUR 14.40
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.75
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Material: Steel · Bearing cage: Sheet steel cage ball-guided · Ø inside: 25 mm · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø outside: 36 mm · Ø ball: 6.34 mm · Groove ring: No · Stock number: K042 · Bearing type: Ball ring · Width: 6.8 mm · Area of application: Standard · Ball bearing closed: No
EUR 9.15
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.40
EUR 25.33/l
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Material: Steel · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 7 mm · Ø inside: 14 mm · Manufacturer: swiing® revival parts · Ø outside: 27 mm · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Surface: blank · Stock number: K1052 · Bearing type: Ball ring · Ball bearing closed: No
EUR 7.95
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Ø outside: 10 mm · Total length: 41.1 - 65 mm · Area of application: Special tool · Surface: galvanized (blue) · Material: Steel · Number of components: 3 pcs · Thread length: 30 mm · Thread type: M6x1 (standard thread) · Width across flats: 8 mm
EUR 19.10
Collection only possible with online purchase and appointment.
