Fork bush for your moped / moped with EBR forks and 30 mm fork leg diameter.
The bush for the fork leg is made of plastic with good sliding properties. The sliding sleeve should also be greased when installed in the fork.
Ø inner: 30 mm
Ø outer: 34 mm
Length: approx. 20 mm
To fully equip a fork, you need four pieces.
Price per piece.
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Plastic |
| Color | black |
| Ø inside | 30 mm |
| Total length | 20 mm |
| Ø outside | 34 mm |
| Puch |
Accessories & related products
Motorex High Pressure Grease 3000 4.5 kg
Manufacturer: Motorex · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -30 - 150 °C · Area of application: Chemistry · Area of application: Fat
EUR 107.30
EUR 23.84/kg
Moped fans also bought
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 65 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 163.30
Not in stock
DR 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 65 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 163.30
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Switch included: Yes · Color: black · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Speedometer recording: 48 mm · Ø External connection: 6.3 mm · Width: 125 mm · Depth: 147 mm · Height: 90 mm · Battery operated: No · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
EUR 43.30
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Number of components: 3 pcs · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread type: MF10x1 (fine pitch thread) · Drive: Outer edge · Thread length: 13 mm · Total length: 32 mm · Width across flats SW: 13 mm · Ø External head: 14 mm · Width across flats SW: 17 mm · Shank: Yes · Area of application: Standard
EUR 14.70
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 285 mm · Number of components: 10 pcs
EUR 148.50
Handlebar fork plate 24 cm Puch Maxi chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Fork plate holder length: 75 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Crossbar: No · Mounting type: Fork plate · Width: 625 mm · Height: 240 mm · Color: Chrome
EUR 54.70
Collection only possible with online purchase and appointment.
