Zinc-plated sprocket (chain wheel) with 32 teeth suitable for the old HR90 Sachs coaster hubs
.The hub with spokes was installed on various Sachs mopeds.
The sprocket is welded to the wheel hub.
| Manufacturer | ESJOT |
| Material | Steel |
| Surface | galvanized (blue) |
| Color | silver |
| Chain type | 415H |
| Number of teeth | 32 pcs |
| Thickness | 4.1 mm |
| Chain pitch | 1/2" x 3/16" |
| Ø inside | 90 mm |
| Ø bolt circle | 107 mm |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Explore categories from Drive & transmission
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Chain type: 415H · Ø bore: 4 mm · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Rolling circumference: 1626 mm · Ø Pin: 3.94 mm
EUR 14.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm · Total length: 6 mm
EUR 2.30
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Nominal diameter (thread): 10.5 mm · Drive: External hexagon · Width across flats: 17 mm · Height: 10 mm
EUR 7.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Chain type: 415H · Ø bore: 4.05 mm · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø Pin: 4 mm
EUR 21.70
ESJOT sprocket 34 teeth coaster brake galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 34 pcs · Ø inside: 94 mm · Thickness: 4.1 mm · Ø mounting hole: 6.4 mm · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 74 mm
EUR 55.00
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Color: gray · Nominal diameter (thread): 6 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 8 mm · Width across flats: 10 mm · Shank: No · Thread length: 12 mm · Number of components: 12 pcs
EUR 22.80
swiing® ingenious pinion shaft reinforced | Zündapp Belmondo, Bergsteiger / Alpa
Manufacturer: swiing® ingenious parts · Material: Copper · Material: Steel · Surface: blank · Surface: coated · Thread type: MF12x1 (fine pitch thread) · Ø inside: 12 mm · Ø outside: 22 mm · Ø outside: 23.8 mm · Recording type: Ø15 x SW12 · Total length: 82.6 mm
EUR 89.40
Working late? Evening hours on Thursday until 20:00
