Camouflaged 28 mm aftermarket exhaust system compatible with your Puch Maxi S / N moped. Also compatible with Puch X30 Sport NS / NL mopeds, though it’s a very tight fit.
Unlike an original exhaust, this 2-piece, camouflaged exhaust system features a larger exhaust manifold, which is particularly well-suited for a tuned engine setup. To allow you to enjoy every ride discreetly in the finest spy-like fashion during everyday use, the original Puch numbers and the Puch logo are engraved on the exhaust system.
Engraved number:
251.1.23.000.3
Note: The M7 screw at the end of the flame tube must be secured with an additional nut to prevent the nut from coming loose and the muffler insert from falling out.
The crimp ring between the flame tube and the exhaust jacket is not of exceptional quality and should therefore be replaced with a high-quality version.
You can find the crimp ring in question, locknuts, and other exhaust systems in the accessories section.
A high-quality product manufactured in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 915 mm |
| Ø outside | 58 mm |
| Mounting type | Welded lug, Stud bolts & nuts |
| Number of fixing points | 4 pcs |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Flute |
| Flame tube attachment | Flange |
| Puch | E50 |
Accessories & related products
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Material: Steel · Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Ø outside: 59 mm · Total length: 910 mm · Color: Chrome · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 154.80
TECNO exhaust 28 mm 2-piece | Puch Maxi S, N / X30
Ø outside: 58 mm · Manufacturer: TECNO · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of fixing points: 4 pcs · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Total length: 915 mm · Ø Flame tube outside: 28 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 68.70
Normio M7 Galvanized Nut
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: M7x1 (standard thread) · Height: 5.3 mm · Drive: External hexagon · Area of application: Standard · Nominal diameter (thread): 7 mm · Strength class: 8 · Width across flats: 11 mm
EUR 0.90
Stop nut M7 Inox
Manufacturer: Normio · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nut type: Self-securing nut · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon
EUR 0.80
Explore categories from Exhaust system
Moped fans also bought
Normio M7 Galvanized Lock Nut
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Self-securing nut · Nominal diameter (thread): 7 mm · Drive: External hexagon · Height: 7.3 mm · Width across flats: 11 mm · Thread type: M7x1 (standard thread) · Thread depth: 4.8 mm · Strength class: 8
EUR 1.05
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Width: 50 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 91.70
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total length: 46 mm · Height flange center hole: 43 mm · Total height: 53 mm · Ø External connection: 20 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 40.00
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Place of use: Exhaust · Ø screw holder: 6.6 mm
EUR 8.50
Working late? Evening hours on Thursday until 20:00
