Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 920 mm |
| Flame tube attachment | Flange |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Ø outside | 70 mm |
| Mounting type | Welded lug, Stud bolts & nuts |
| Number of fixing points | 1 pcs |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
Moped fans also bought
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Total length: 6 mm · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.40
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 44 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
EUR 49.60
- 10 %
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Ø Inside entrance: 15 mm · Width: 50 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Area of application: Tuning · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 92.30
EUR 83.10
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø External connection: 20 mm · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 40.30
Collection only possible with online purchase and appointment.
