Fancy saddle with red imitation leather for universal use on your moped, moped and small motorcycle.
The seatbelt can be mounted on all seat tubes with an outer diameter of 22 mm and impresses with its good workmanship.
Length: approx. 470 mm
Width: approx. 240 mm
Height: approx. 200 mm
Fastening bolts at the rear: 2x M8 x 12
Fastening bolt spacing: 100 mm
The seat clamp is already mounted and included in the scope of delivery.
The support plate for mounting on the luggage carrier is not included in the scope of delivery and must be manufactured by yourself depending on the model and brand.
Other seat mounts, seat tubes and towbars can be found in the accessories section.
NOS – New from old stock.
A quality product made in Italy.
| Width | 240 mm |
| Manufacturer | Made in Italy |
| Material | Imitation leather, Foam, Steel |
| Surface | raw, varnished |
| Color | red, black |
| Spring-loaded | No |
| Total length | 470 mm |
| Number of fixing points | 3 pcs |
| Height | 200 mm |
| Hole pattern [mm] | 100 |
Accessories & related products
HAERRY trailer coupling fifth wheel short
Manufacturer: HAERRY · Ø ball: 30 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Thickness: 6 mm · Width: 75 mm · Height: 85 mm · Clamping diameter: 30 mm · Thread type: MF8x1 (fine pitch thread) · Hole spacing: 56 mm · Total length: 160 mm · Wide intake: 75 mm
EUR 74.50
Bench seat long
Width: 180 mm · Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: galvanized (blue) · Surface: varnished · Spring-loaded: No · Lettering: No · Number of fixing points: 2 pcs · Total length: 520 mm · Color: black · Height: 110 mm · Height: 170 mm
EUR 80.20
HAERRY trailer coupling Attachment to seat tube long
Manufacturer: HAERRY · Ø ball: 30 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Total length: 195 mm · Wide intake: 75 mm · Clamping diameter: 30 mm · Height: 85 mm · Width: 75 mm · Thickness: 6 mm · Hole spacing: 56 mm · Thread type: MF8x1 (fine pitch thread)
EUR 80.20
Explore categories from Saddle
Moped fans also bought
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Drive: External hexagon · Nominal diameter (thread): 10 mm · Ø outside: 19.8 mm · Thread type: MF10x1 (fine pitch thread) · Height: 10.5 mm · Width across flats: 15 mm
EUR 3.30
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Total length: 335 mm · Color: Chrome · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm
EUR 57.30
mk-Merch license plate holder "mofakult" plastic (CH version)
Manufacturer: mofakult Merch · Material: Plastic · Color: black · Total length: 175 mm · Width: 108 mm · Mounting type: Nuts & bolts · Height: 11 mm · Number of fixing points: 2 pcs · Ø mounting hole: 6 mm · Number of fixing points: 9 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 50 mm · Thread length: 6 mm
EUR 13.70
EUR 7.90
Handlebar fork plate 26 cm "Chopper" with chrome plate
Ø outside: 22 mm · Width: 490 mm · Height: 260 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Fork plate holder length: 85 mm · Clamping diameter: 22 mm · Length handlebar ends: 205 mm · Crossbar: Yes · Ø Strut: 55 mm · Mounting type: Fork plate · Strut length: 230 mm
EUR 45.80
Not in stock
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Manufacturer: GPO · Material: Aluminum · Place of use: left · Place of use: right · Wheel size: 17 " · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 12 mm · Ø axle: 12 mm · Thread type: MF10x1 (fine pitch thread)
EUR 32.00
Working late? Evening hours on Thursday until 20:00
