Grip covers with finely textured leather look in red-brown color for your moped, moped and small motorcycle with automatic transmission.
This grip set includes one grip cover each with 22 and 24 mm inner diameter.
Ø inside: 22 / 24 mm
Total length: 130 mm
Material grip ends: Aluminum
For manual mopeds with 24 mm inner diameter on both grips, two grip sets must be ordered.
To make installation easier, we recommend heating the grip rubber slightly or spraying the inside with GPO Grip Spray.
Further grip sets and the aforementioned spray can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Imitation leather, Aluminum |
| Color | brown, red |
| Total length | 130 mm |
| Ø inside | 22 mm, 24 mm |
Accessories & related products
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Bundle: 6 mm · Total length: 15 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Width across flats SW: 7 mm · Thread length: 7 mm · Area of application: Standard
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Drive: Slot · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.30
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø shaft: 11.9 mm · Total length: 165 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Shank length: 114 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Thread length: 25 mm · Thread length: 26 mm · Height: 9.9 mm
EUR 16.80
EBR front reinforcement/ mudguard arch black (1A quality)
Ø mounting hole: 6.2 mm · Manufacturer: EWC · Material: Steel · Outer width: 143 mm · Surface: varnished · Color: black · Wheel size [inch]: 17 " · Number of fixing points: 6 pcs · Distance mudguard - center hole: 203 mm · Distance mudguard - center hole: 239 mm · Total length: 267 mm · Hole spacing: 36 mm · Mounting type: Nuts & bolts · Wide intake: 127 mm
EUR 45.20
Collection only possible with online purchase and appointment.
