5 m of blue exhaust tape for your moped, scooter, small motorcycle, and motorcycle.
With this heat-protection tape, you’ll turn your ride into an eye-catcher. The pop of color makes your vehicle stand out from the crowd and sets it apart from the standard models.
The heat wrap reduces the temperature emitted by the exhaust system. This causes the exhaust gases themselves to become hotter, resulting in faster exhaust flow and lower pressure in the muffler. Additionally, other components such as the cylinder and carburetor are better protected from the exhaust’s waste heat.
The fiberglass material offers excellent thermal properties and high flexibility, which is advantageous when wrapping the manifold and exhaust.
Package Contents:
5 m heat protection tape
, 6 stainless steel cable ties
Installation tip: Soak the entire wrap in water beforehand. Alternatively, or in addition to the stainless steel cable ties, you can also wrap the entire area of the wrap with wire.
Note: Due to the glass fiber content, it is strongly recommended that you wear gloves during installation.
Heat-resistant tape sold by the meter, alternative colors, and additional stainless steel cable ties can be found in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Total length | 5000 mm |
| Thickness | 1.5 mm |
| Width | 50 mm |
| Manufacturer | GPO |
| Material | Fiber, Chrome steel (colloquially known as stainless steel) |
| Color | blue |
Accessories & related products
Explore categories from Exhaust system
Moped fans also bought
Hot 
Union Plastic Pedals "Original"
Width: 77 mm · Manufacturer: Union · Material: Plastic · Material: Steel · Surface: rubberized · Drive: Hexagon socket · Drive: Outer edge · Total length: 129 mm · Thread type: FG14.3 (9/16" 20G) · Color: black · Height: 29 mm · Reflectors: Yes · Width across flats: 15 mm
EUR 14.80
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread) · Color: silver
EUR 14.80
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Width: 7 mm · Manufacturer: Sachs · Material: NBR · Place of use: Crankshaft · Ø inside: 17 mm · Ø outside: 33 mm
EUR 10.20
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Bearing cage: Sheet steel cage ball-guided · Width: 10 mm · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Area of application: Standard · Ø inside: 12 mm · Ø outside: 32 mm
EUR 9.75
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Width: 3.5 mm · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8.60
Power1 air filter foam straight Ø 20 / 28 mm
Ø outside: 50 mm · Ø outside: 70 mm · Manufacturer: Power1 · Camouflaged: No · Color: blue · Filter type: Foam · Length rubber part: 18 mm · Length of filter section: 100 mm · Area of application: Tuning · Ø Internal connection: 20 mm · Ø Internal connection: 28 mm · Total length: 118 mm · Mounting type: Plug connection clamped
EUR 25.10
Working late? Evening hours on Thursday until 20:00
