15 mm tuning intake manifold for Puch X30 Velux cylinders / racing cylinders
The intake manifold has a continuous 15 mm bore and is therefore ideal for original cylinders without a seal or tuning cylinders with a round intake.
Stud bolt hole spacing: 32 mm
Total height: 43 mm
Includes O-ring for a clean seal.
Long, thin flanges on the cylinder and carburettor connection prevent false air from being drawn in.
Corresponding add-on parts such as carburetors, jets, gaskets, air filters, etc. can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Cast aluminum |
| Ø inside | 15 mm |
| Mounting type | Screws |
| Ø External connection | 20 mm |
| Hole spacing inlet | 32 mm |
| Total height | 43 mm |
| Number of fixing points | 2 pcs |
| Area of application | Tuning |
| Puch | Z50 (X30 Velux) |
Ratings
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Material: Aluminum · Total length: 66 mm · Height: 95 mm · Manufacturer: GPO · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 75.00
swiing® revival nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 18.40
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.40
swiing® revival nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
EUR 18.40
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Nominal diameter: 15 mm · Hole spacing inlet: 32 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø Internal connection: 20 mm · Area of application: Tuning
EUR 142.00
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Material: Aluminum · Total length: 66 mm · Height: 95 mm · Manufacturer: GPO · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 75.00
swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux
Material: Steel · Color: Chrome · Total length: 380 mm · Number of fixing points: 2 pcs · Ø inside: 25 mm · Manufacturer: swiing® ingenious parts · Ø outside: 28 mm · Surface: chrome-plated · Mounting type: Stud bolts & nuts · Hole spacing outlet: 42 mm
EUR 46.10
swiing® ingenious clutch spring reinforced +20% | Puch Z50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 20.5 mm · Ø wire: 4.6 mm · Ø inside: 30 mm · Manufacturer: swiing® ingenious parts · Ø outside: 39 mm · Number of components: 1 pcs · Surface: coated · Area of application: Tuning
EUR 27.60
Collection only possible with online purchase and appointment.
