Black M6 threaded stud with 62 mm length for mounting the GPO «Divertimento» and BAD ASS «Diablo» cylinder on your moped / moped with Sachs 50, 502, 50/2, 50/3 or 50/4 engine.
| Manufacturer | GPO |
| Strength class | 10.9 |
| Material | Steel |
| Surface | blackened |
| Diameter | 5.3 mm |
| Total length | 62 mm |
| Thread type | M6x1 (standard thread) |
| Thread length | 11.8 mm, 7.8 mm |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.20
EUR 2’520.00/l
GPO stud bolt set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Material: Steel · Surface: blackened · Diameter: 5.3 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Total length: 62 mm · Width across flats: 10 mm · Thread length: 7.8 mm · Thread length: 11.8 mm
EUR 13.70
Moped fans also bought
Shaft seal NBR 10/16/4.5 A Shift shaft | Sachs 50/3, 50/4
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Shift shaft · Width: 4.5 mm · Ø inside: 10 mm · Ø outside: 16 mm
EUR 5.65
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Nominal diameter inside: 13 mm · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
EUR 19.50
Oil seal FPM 15/30/7 B DUO | Sachs 50/2, 503
Temperature resistance (min.): -30 - 200 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: FPM - Fluororubber · Surface: raw · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30.1 mm · Area of application: Standard · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 9.10
Shaft seal FPM 14.96/31.5/3.5 Pinion shaft | Sachs 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 200 °C · Manufacturer: Sachs · Material: FPM - Fluororubber · Place of use: Pinion shaft · Width: 3.5 mm · Ø inside: 14.96 mm · Ø outside: 31.4 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 200 · Sachs OEM no.: 0230 011 100
EUR 14.90
BAD ASS Diablo cylinder Ø 41 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Surface: raw · Crankshaft stroke: 42 mm · Displacement: 55 ccm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Area of application: Tuning · Hole spacing inlet: 31 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37
EUR 276.40
Collection only possible with online purchase and appointment.
