Side mirror made of aluminum, chrome-plated, for side mounting on the handlebars.
The mirror glass frame and the mirror rod are made of aluminum, chrome-plated
All screws are made of stainless steel (Inox).
The mirror can be used either left or right.
The mirror is inserted into the side of the handlebars and fixed with the screw. Suitable for all handlebars with an outer diameter of 22 mm.
Ø Mirror surface: 95 mm
Mirror rod length: 10 cm
Mirror clamp thread: M6
Clamp diameter of the individual bushes: 13.9 / 15.9 / 17.9 / 19.9 / 20.9 / > 21 mm
Quality product from the German manufacturer HIGHSIDER.
| Manufacturer | HIGHSIDER |
| Test mark | E13 |
| Material | Aluminum |
| Surface | chrome-plated |
| Clamping diameter | 22 mm |
| Ø mirror surface | 95 mm |
| Mirror rod length | 100 mm |
| Color | Chrome |
| Thread size | M6 |
Accessories & related products
Bumm mirror oval left plug-in version chrome
Color: Chrome · Manufacturer: Bumm · Material: Steel · Test mark: none · Surface: chrome-plated · Mirror surface length: 100 mm · Clamping diameter: 17 mm · Wide mirror surface: 70 mm · Ø mirror rod: 8 mm · Mirror rod length: 100 mm · Thread size: M8
EUR 28.60
Bumm mirror oval left short plug-in version chrome
Color: Chrome · Manufacturer: Bumm · Material: Steel · Test mark: none · Surface: chrome-plated · Mirror surface length: 114 mm · Clamping diameter: 17 mm · Wide mirror surface: 68 mm · Mirror rod length: 80 mm · Thread size: M6
EUR 44.20
Not in stock
Bumm mirror oval right plug-in version chrome
Manufacturer: Bumm · Material: Steel · Test mark: none · Color: Chrome · Surface: chrome-plated · Mirror surface length: 100 mm · Clamping diameter: 17 mm · Wide mirror surface: 70 mm · Ø mirror rod: 8 mm · Mirror rod length: 100 mm · Thread size: M8
EUR 28.60
Explore categories from Mirror
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.40
swiing® revival nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 18.20
Speedometer 60 km/h Ø 48 VDO replica
Color: Chrome · Color: beige · Color: black · Color: red · Ø outside: 53 mm · Material: Metal · Material: Plastic · Surface: chrome-plated · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Ø Receptacle: 48 mm · Depth: 50 mm · Total height: 69 mm · Thread type: MF10x1 (fine pitch thread)
EUR 85.90
Not in stock
swiing® revival 19" rear fender "Oldie" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 650 mm · Scope: 1040 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 29 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 335 mm · Wheel size: 19 "
EUR 100.80
Working late? Evening hours on Thursday until 20:00
