Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 320 mm
Ø outer coil spring: 44 mm
Ø spars: 28 mm
Ø bushings for fastening: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
| Manufacturer | IMCA |
| Ø outside | 44 mm |
| Color | black |
| Material | Steel |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Ø spars | 28 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 320 mm |
Ratings
Accessories & related products
IMCA shock absorber 30 cm chrome
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø outside: 45 mm · Ø spars: 28 mm · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 58.80
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.30
EUR 2’530.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Material: Steel · Color: black · Number of fixing points: 2 pcs · Manufacturer: YSS · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Hole spacing: 330 mm
EUR 161.60
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Damping type: Spring · Ø outside: 45 mm · Adjustable: Yes · Color: Chrome · Color: black · Ø Fastening inside: 10 mm · Ø spars: 28 mm · Hole spacing: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 69.20
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 20.70
Moped fans also bought
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Wheel size: 17 " · Total length: 425 mm · Width: 168 mm · Number of fixing points: 4 pcs · Height: 32.5 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
EUR 23.00
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
EUR 14.90
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Ø outside: 12.5 mm · Material: Steel · Surface: varnished · Color: black · Total length: 420 mm · Width: 170 mm · Height: 35 mm · Mounting type: Screws · Ø mounting hole: 8.1 mm · Hole spacing: 410 mm · Number of fixing points: 4 pcs
EUR 34.50
Collection only possible with online purchase and appointment.
