Racing clutch from Jammer with flange mount for your moped / moped with Minarelli V1 engine
.This high-quality racing clutch was manufactured from heavy-duty steel using laser cutting
Two different spring rates are included in the scope of delivery for the corresponding application area.
- grün: 1.8 mm wire diameter for souped-up motors
- Yellow: 2 mm wire diameter for extremely souped-up motors
Note: The clutch is not compatible with crankshafts that have a cone mount. The racing clutch is supplied pre-assembled. The M6 screws are not yet tightened and must be secured and tightened with Loctite before use. The tightening torque is 6 Nm.
| Manufacturer | Jammer |
| Material | Steel, Composite materials |
| Ø outside | 82.5 mm |
| Recording type | 2-edge |
| Number of jaws | 3 pcs |
| Number of springs | 6 pcs |
| Thickness | 20.3 mm |
| Area of application | Tuning, Racing |
| Fantic |
Ratings
Accessories & related products
Loctite 270 High-strength threadlocker 50 ml
Temperature resistance (min.): -55 - 180 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Area of application: Chemistry · Contents: 50 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Color: green · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 5 N/m · Breakaway torque (according to material): 31 N/m · Breakaway torque (according to material): 33 N/m
EUR 84.20
EUR 1’684.00/l
Jammer clutch cone version | Minarelli V1
Manufacturer: Jammer · Material: Composite materials · Area of application: Racing · Material: Steel · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 20.3 mm · Number of springs: 6 pcs · Ø outside: 82.5 mm
EUR 230.90
Not in stock
Explore categories from Clutch
Moped fans also bought
GUIA light switch chrome (3 switch positions)
Total length: 55 mm · Width: 30 mm · Height: 30 mm · Manufacturer: GUIA · Material: Plastic · Housing material: Steel · Surface: chrome-plated · Color: Chrome · Substructure material: Steel · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Ø Handlebars: 22 mm
EUR 16.10
NGK BR9HIX Spark plug short thread suppressed Iridium
Manufacturer: NGK · Candle designation: BR9HIX · Candle thread type: short · Spark plug socket: M4 · Spark plug socket: SAE · Electrode material: Iridium · Suppressed: Yes · Width across flats: 21 mm · Thread type: MF14x1.25 (fine pitch thread) · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 27.10
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Total length: 53.5 mm · Width: 9 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ball bearing closed: Yes · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm
EUR 34.10
Collection only possible with online purchase and appointment.
