
Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, angular seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Width | 165 mm |
| Height | 100 mm |
| Total length | 500 mm |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 6.5 mm, 9 mm |
| Hole spacing | 60 mm, 131 mm |
| Mounting type | Screws, Nuts & bolts |
| Piaggio | Ciao - P |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Mounting type: Screws · Ø mounting hole: 6.5 mm · Total length: 575 mm · Height: 100 mm · Number of fixing points: 4 pcs · Width: 140 mm · Hole spacing: 85 mm · Hole spacing: 135 mm · Piaggio OEM number: 114151
EUR 122.50
Explore categories from Luggage carrier & trailer coupling
Moped fans also bought
GPO license plate holder Inox (CH version)
Ø mounting hole: 5 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs
EUR 12.10
Not in stock
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Surface: varnished · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
EUR 22.20
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Width: 72 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Height: 111 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82 · Area of application: Tuning
EUR 77.90
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Color: transparent · Color: white · Filter type: Plastic net · demountable: No · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm · Ø outside: 20 mm · Ø inside: 3 mm · Total length: 23.4 mm · Total length: 50 mm
EUR 6.45
swiing® revival air filter original gray | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: gray · Filter type: Standard sieve · Width: 68 mm · Height: 52 mm · Ø Internal connection: 20 mm · Total length: 165 mm · Area of application: Original · Area of application: Standard · Mounting type: Plug connection clamped
EUR 50.10
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Drive: Cross recess · Screw head: Panhead · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 8 pcs · Area of application: Standard · Thread type: M5x0.8 (standard thread)
EUR 5.45









