Racing air filter with solid plastic housing and red foam insert.
The air filter has a centric connection, as shown in Figure 3.
Fits all Dell'Orto PHBG carburetors. Is screwed directly onto the thread of the carburetor.
Can therefore be fitted without any problems even in tight spaces.
The housing can be easily opened to clean the filter.
Ø external air filter height: 80 mm
Height air filter height: 45 mm
Ø carburettor connection: 31 mm (with thread)
Quality product from the Italian manufacturer Malossi.
| Thread type | MF32x1.25 (fine pitch thread) |
| Manufacturer | Malossi |
| Color | black |
| Filter type | Foam |
| Camouflaged | No |
| Mounting type | Screws |
| Ø outside | 80 mm |
| Ø Internal connection | 31 mm |
| Height | 45 mm |
| Area of application | Tuning |
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.30
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Displacement: 70 ccm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 114.60
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.05
GPO 17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 17.5 mm · Carburetor type: PHBG AS · Color: black · Mounting type: Bride · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 80 · Ø Internal connection: 24 mm · Total length: 71.5 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Width: 63 mm · Vacuum connection: Yes · Height: 130 mm · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle block: 262AU · Size of secondary nozzle: 50 · Area of application: Tuning
EUR 91.70
Polini 47 mm cylinder kit | Minarelli V1
Manufacturer: Polini · Material: Gray cast iron · Surface: varnished · Nominal diameter: 47 mm · Displacement: 75 ccm · Hole spacing inlet: 38.5 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø Inlet inside: 18.3 mm · Ø outlet inside: 20.5 mm · Ø piston pin (B): 12 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 46 x 46 · Decompressor: none · Hole spacing outlet: 38 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 240.80
Working late? Evening hours on Thursday until 20:00
