«X Special Belt» drive belt with 30° angle for your Piaggio Ciao moped / moped with Vario drive and installed over-range kit from Malossi.
This drive belt is used as standard in conjunction with the 107 mm converter pulleys.
Note: Due to its dimensions, this timing belt is not suitable for use with standard variomatic drives with 13 mm wide belts.
For Piaggio Ciao models, the frame must be adapted so that the overrange kit can be installed.
Alternative belts, the complete overrange kit and other add-on parts can be found in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Rolling circumference | 970 mm |
| Belt profile | toothed / serrated |
| Outer width | 15.5 mm |
| Gearbox type | Vario |
| Height | 8.5 mm |
| Piaggio | Ciao - P, SC, PX, C24 |
Ratings
Accessories & related products
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 11.40
M10 sealing ring Fiber
Thickness: 1.6 mm · Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø inside: 10 mm · Ø outside: 13.8 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.85
DUCATI ignition coil (1A quality)
Color: black · Total length: 76.5 mm · Height: 17 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5.9 mm · Cable length: 37 mm · Mounting type: Screws · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 75.00
Not in stock
swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
Number of fixing points: 2 pcs · Ø inside: 19 mm · Manufacturer: swiing® ingenious parts · Color: graphite colors · Material: Aluminum · Area of application: Tuning · Surface: anodized · Mounting type: Screws · Ø External connection: 24 mm · Hole spacing inlet: 36 mm
EUR 34.50
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: PHBG AS · Choke control: Hand choke · Width: 71 mm · Total length: 71.5 mm · Color: black · Height: 123 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 85 · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 55 · Nozzle block: 262AU · Camouflaged: No · Size of secondary nozzle: 50
EUR 92.30
Collection only possible with online purchase and appointment.
