Steel cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system in order to convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 5 mm
Material: steel
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Manufacturer | MBR |
| Material | Steel |
| Surface | raw |
| Thickness | 5 mm |
| Width | 48 mm |
| Ø mounting hole | 6.3 mm |
| Hole pattern [mm] | 60 x 35 mm |
| Total length | 72.5 mm |
| Number of fixing points | 4 pcs |
| Mounting type | Screws |
| Area of application | Tuning |
| Puch |
Ratings
Accessories & related products
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No · Area of application: Tuning
EUR 240.50
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Color: red · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 26.20
EUR 374.29/l
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Leg length: 45 mm · Length spring hook: 50 mm · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 25.5 mm · Ø outside: 30 mm · Total length: 125 mm · Area of application: Original · Area of application: Standard
EUR 5.60
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.30
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
EUR 3.10
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Width: 49 mm · Total length: 77 mm · Thick membrane platelets: 0.4 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 6.6 mm · Hole pattern [mm]: 60 x 35 mm · Area of application: High End
EUR 131.60
Collection only possible with online purchase and appointment.
