Black intake manifold suitable for the MLM conversion kit for slotted Puch mopeds / mopeds. A Bing SRE carburettor can be fitted to the MLM adaptation using the connecting piece.
With this conversion kit, you can get the remaining power out of your cylinder. And without major modifications. The use of a diaphragm system leads to better throttle response in all engine speed ranges.
Ø carburetor mount: 19.95 mm
Ø inside: 15 mm
Figure 4 is for illustrative purposes only.
Matching diaphragms, the corresponding adapter and alternative intake manifolds can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
Details
| Manufacturer | MLM |
| Material | Steel |
| Surface | varnished |
| Ø inside | 15 mm |
| Ø External connection | 20 mm |
| Color | black |
| Area of application | Tuning |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Puch |
Accessories & related products
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 82 · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Standard · Area of application: Tuning
EUR 149.60
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90.00
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
EUR 22.40
EUR 320.00/l
Moped fans like you also bought:
Collection only possible with online purchase and appointment.
