Polini CP 17.5 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main nozzle: 80
Installed secondary nozzle: 36
Ø Nominal: 17.5 mm
Ø Connection air filter: 46 mm
Ø Connection intake manifold: 25 mm
Alternative racing carburetors, the sleeve for mounting and the matching nozzles can be found under accessories.
Quality product from the Italian manufacturer Polini.
Details
| Manufacturer | Polini |
| Camouflaged | No |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Total length | 71 mm |
| Nozzle size | 80 |
| Width | 66 mm |
| Nominal diameter | 17.5 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Height | 132 mm |
| Mounting type | Rubber sleeve |
| Ø Inside entrance | 42 mm |
| Area of application | Tuning, Racing, Performance |
| Ø Output inside | 21.5 mm |
| Ø Air filter connection | 47 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Size of secondary nozzle | 36 |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nominal diameter: 17.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 62 · Size of secondary nozzle: 40 · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 157.50
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 44.90
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Drive: External hexagon
EUR 44.90
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Nominal diameter: 26 mm · Nozzle thread: M5x0.8 (standard thread) · Total length: 83 mm · Nozzle size: 105 · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Size of secondary nozzle: 45 · Width: 65 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 163.10
Polini CP 15 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nominal diameter: 15 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Ø Inside entrance: 42 mm · Ø Output inside: 21 mm · Ø Air filter connection: 47 mm · Total length: 71 mm · Width: 66 mm · Height: 132 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mounting type: Rubber sleeve · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle block: 35-12 · Size of secondary nozzle: 36 · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 151.90
Polini CP 19 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Width: 66 mm · Carburetor type: CP · Total length: 71 mm · Nominal diameter: 19 mm · Height: 132 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Rubber sleeve · Nozzle size: 90 · Ø Inside entrance: 42 mm · Ø Output inside: 21.8 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle block: 35-12 · Size of secondary nozzle: 40
EUR 168.80
Moped fans like you also bought:
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Ø outside: 130 mm · Height: 88 mm · Total length: 160 mm · Color: Chrome · Color: black-matt · Width: 150 mm · Hole spacing: 137.5 mm · Number of fixing points: 2 pcs
EUR 168.80
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Color: black · Number of teeth: 40 pcs · Ø bolt circle: 106 mm · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm
EUR 22.40
Fuel tap horizontal M16x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF16x1 (fine pitch thread)
EUR 14.50
Not in stock
Collection only possible with online purchase and appointment.
