Diaphragm adapter with AM6 mounting, compatible with your Puch moped equipped with a Polini cylinder.
This diaphragm housing connects the standard Polini mounting pattern on the cylinder to an AM6 diaphragm block. This allows you to mount a Minarelli AM6 diaphragm insert—the same type used in Puch Gilardoni setups—onto your Polini racing cylinder.
The four-valve design is intended as an alternative to conventional 4-valve diaphragm systems and offers a generous flow rate for powerful engines with larger carburetors.
The adapter is mounted using four M5 x 12 mm hex socket screws. The mounting holes are large enough to accommodate M6 screws if necessary.
Note: According to the supplier, this adapter can be used on the Tomo A35 and Peugeot 103. However, space may be tight, requiring some modification.
You can find diaphragm blocks, gaskets, screws, and intake manifolds in the accessories section.
| Color | black |
| Ø inside | 32 mm, 35.95 mm, 39 mm, 44 mm |
| Material | Aluminum |
| Total length | 73 mm |
| Thread type | M6x1 (standard thread) |
| Hole pattern [mm] | 34.8 x 59.9 |
| Total height | 54.1 mm |
| Number of fixing points | 8 pcs |
| Mounting type | Screws |
| Hole spacing inlet | 32 mm, 36 mm, 38 mm |
| Area of application | Tuning, Racing |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Malossi 4-folding diaphragm insert Carbon Gilardoni italkit | Puch
Manufacturer: Malossi · Material: Plastic · Number of flaps: 4 pcs · Membrane material: Carbon · Hole pattern [mm]: 61 x 39 mm / 58 x 35 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 59.50
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Total length: 77 mm · Width: 49 mm · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Ø mounting hole: 6.6 mm · Hole pattern [mm]: 60 x 34.8 mm · Number of fixing points: 4 pcs · Mounting type: Screws · Area of application: High End
EUR 131.80
Not in stock
Membrane transpacer Gilardoni italkit rectangle 6 mm aluminum | Puch ZA50
Total length: 72.8 mm · Width: 47.8 mm · Material: Aluminum · Surface: blank · Ø mounting hole: 5.4 mm · Thickness: 6.15 mm · Hole pattern [mm]: 59 x 34.5 · Number of fixing points: 4 pcs · Mounting type: Screws · Area of application: Tuning
EUR 30.90
Polini 4-flap diaphragm insert
Manufacturer: Polini · Total length: 72.9 mm · Width: 47.9 mm · Camouflaged: No · Material: Plastic · Material: Sheet metal (steel) · Surface: raw · Number of flaps: 4 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Hole pattern [mm]: 35 x 60 · Number of fixing points: 4 pcs · Mounting type: Stud bolts & nuts · Area of application: Tuning
EUR 91.70
Screw M5x12 cylinder head hexagon socket, galvanized
Drive: Hexagon socket · Screw head: Cylinder head · Thread length: 12 mm · Total length: 17 mm · Material: Steel · Surface: galvanized (blue) · Ø External head: 8.5 mm · Thread type: M5x0.8 (standard thread) · Shank: No · Nominal diameter (thread): 5 mm · Strength class: 8.8
EUR 1.05
Explore categories from Carburetor & intake system
Moped fans also bought
Continental 2.25 x 16" tires KKS
Inventory-managed: No · Color: black · Manufacturer: Continental · Tire width: 2.25 " · Tire width [mm]: 57.15 · Width: 2 1/4 " · Wheel size: 16 " · Old designation: 20 x 2.25 " · Speed index: B = 50 km/h · Load capacity index: 38 = 132 kg · Profile type: KKS 10 · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 57.30
Screw M5x12 cylinder head hexagon socket, galvanized
Drive: Hexagon socket · Screw head: Cylinder head · Thread length: 12 mm · Total length: 17 mm · Material: Steel · Surface: galvanized (blue) · Ø External head: 8.5 mm · Thread type: M5x0.8 (standard thread) · Shank: No · Nominal diameter (thread): 5 mm · Strength class: 8.8
EUR 1.05
Working late? Evening hours on Thursday until 20:00
