Black racing handlebars in carbon look with bolted crossbar for your moped, moped and small motorcycle. The aluminum handlebar is mounted on the fork plate.
Both balance ends are slightly bent backwards, the left handlebar end is also knurled for additional grip. This extra-wide design gives you maximum control even at high speeds.
Height: 80 mm
Width: 820 mm
Ø tube: 22 mm
Length handlebar ends (for grip mounting): 235 mm
Length fork plate mount: 140 mm
Matching attachments such as clamps, steerer nuts, grips, etc. can be found in the accessories
.| Material | Aluminum |
| Color | Carbon |
| Ø outside | 22 mm |
| Fork plate holder length | 140 mm |
| Clamping diameter | 22 mm |
| Length handlebar ends | 235 mm |
| Crossbar | Yes |
| Mounting type | Fork plate |
| Ø inside (C) | 12 mm |
| Total length over ends | 240 mm |
| Width | 820 mm |
| Height | 80 mm |
Accessories & related products
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 59 mm · Total length: 910 mm · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 171.30
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Total length: 47 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Total height: 54 mm · Number of fixing points: 2 pcs · Ø inside: 14.5 mm · Ø External connection: 20 mm · Height flange center hole: 43 mm · Area of application: Tuning · Camouflaged: Yes
EUR 13.60
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Ø inside: 94 mm · Cranking (offset): 8 mm · Hole spacing 2: 68 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Ø bolt circle: 105.5 mm
EUR 22.70
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Decompressor: Yes
EUR 11.30
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 10.70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.30
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Surface: polished · Material: Chrome steel (known as Nirosta®) · Folding the ends: closed folded · Color: Chrome · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts · Wheel size [inch]: 17 "
EUR 39.90
Collection only possible with online purchase and appointment.
