Hot 
17 mm racing carburetor for Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV engines, as well as other mopeds / mopeds which are originally fitted with a Bing 17 & 18 carburetor and have the idle throttle screw on the right-hand side of the carburetor (in the direction of travel). The tuning carburetor is also used if you use a mushroom air filter on your 503 engine. On all ADV models, the connection dimensions also fit the intake manifold and the air filter.
World first: The tuning carburetor is made up of the slide tower of the SRF 17 mm carburetor and the base of the SRE carburetor. This achieves a passage of 17 mm with an almost original appearance. A special intake manifold with a 23 mm connection diameter is required.
For perfect camouflage, the tuning carburetor is provided with the original number «1/12/327». This means that the carburetor is practically indistinguishable from the original when fitted.
Installed throttle body size: 74
Installed throttle body stock: 2.20, suitable for M3.5 nozzles
Ø Air filter connection: 28 mm
Ø Intake manifold connection: 23 mm
Maximum tightening torque on the clamping screw: 3-4 Nm
Total length: 61.5 mm
Height from center of passage: 45 mm
Total height (without choke pin & pipe bend): 89 mm
You can find the corresponding intake manifold, a matching nozzle set and various attachments in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Material | Aluminum |
| Manufacturer | swiing® ingenious parts |
| Camouflaged | Yes |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRE |
| Choke control | Hand choke |
| Total length | 64.8 mm |
| Nominal diameter | 17 mm |
| Ø fuel hose connection | 5 mm |
| Ø Internal connection | 23 mm |
| Ø Inside entrance | 17 mm |
| Ø Output inside | 17.1 mm |
| Area of application | Tuning |
| Ø Air filter connection | 27.5 mm |
| Mixed oil connection | No |
| Vacuum connection | No |
| Width | 47 mm |
| Height | 110 mm, 89 mm |
| Nozzle thread | M3.5x0.6 (standard thread) |
| Mounting type | Plug connection clamped |
| Nozzle block | 2.2 |
| Nozzle size | 74 |
| Clamping screw torque (max.) | 3 N/m |
Suitable for the following models
| Universal | |
| Sachs |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs
EUR 3.15
Mushroom air filter foam black, Dell'Orto PHBG (Ø=32 mm)
Camouflaged: No · Color: black · Material: Foam · Material: Rubber · Filter type: Foam · Total length: 110 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Ø outside: 60 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 14.50
66HEROES Mushroom air filter grille 28 - 32 mm black
Manufacturer: 66HEROES · Camouflaged: No · Color: black · Material: Metal · Material: Rubber · Filter type: Grille · Total length: 114 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Ø outside: 60 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 17.90
Not in stock
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Ø inside: 17 mm · Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Ø External connection: 23 mm · Mounting type: Screws · Hole spacing inlet: 32 mm · Number of fixing points: 3 pcs · Total height: 56.5 mm · Height flange center hole: 45 mm · Total length: 54 mm · Thread type: M6x1 (standard thread)
EUR 84.30
New
Hot
swiing® ingenious intake manifold 17 mm short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total length: 50 mm · Thread type: M6x1 (standard thread) · Area of application: Racing · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 56.20
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø External connection: 20 mm · Hole spacing inlet: 32 mm · Ø inside: 15 mm · Number of fixing points: 2 pcs · Total length: 50 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 56.20
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs
EUR 3.15
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Drive: Slot
EUR 17.90
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing cage: Brass cage ball-guided · Area of application: Standard · Material: Brass · Material: Steel · Surface: blank · Ø inside: 15 mm · Ø outside: 40 mm · Stock number: BO15 · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 28.00
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Area of application: Tuning · Filter type: Racing screen · Total length: 165 mm · Ø Internal connection: 20 mm · Width: 68 mm · Height: 52 mm · Mounting type: Plug connection clamped
EUR 67.40
66HEROES Air filter mushroom grille black Dell'Orto PHBG (Ø=28 mm)
Manufacturer: 66HEROES · Camouflaged: No · Color: black · Filter type: Grille · Mounting type: Plug connection clamped · Total length: 70 mm · Ø Internal connection: 28 mm · Ø outside: 60 mm · Area of application: Tuning
EUR 21.30
Not in stock
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Ø inside: 17 mm · Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Ø External connection: 23 mm · Mounting type: Screws · Hole spacing inlet: 32 mm · Number of fixing points: 3 pcs · Total height: 56.5 mm · Height flange center hole: 45 mm · Total length: 54 mm · Thread type: M6x1 (standard thread)
EUR 84.30
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Camouflaged: No · Material: Aluminum · Ø inside: 17.8 mm · Ø External connection: 20 mm · Mounting type: Stud bolt · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 55 mm · Height flange center hole: 45 mm · Total length: 65 mm · Area of application: Tuning
EUR 84.30
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Material: Oiled paper · Number of components: 2 pcs · Thickness: 0.3 mm · Thickness: 1 mm · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Area of application: Tuning
EUR 16.20
Not in stock
Collection only possible with online purchase and appointment.
