Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Weight | 250 g |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | blank |
| Ø outside | 117 mm |
| Ø inside | 71.8 mm |
| Thickness | 5 mm |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 5 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Ø bolt circle | 101 mm |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Ratings
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Area of application: Tuning · Material: Aluminum · Material: Steel · Ø cable: 7 mm · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Number of fixing points: 6 pcs · Ø mounting plate: 90 mm · Weight: 340 g · Ø Flywheel outside: 71.5 mm · Ø Internal flywheel: 61.5 mm · Mounting type: Screws
EUR 344.10
HPI racing ignition clockwise without light
Manufacturer: HPI · Weight: 424 g · Material: Aluminum · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Number of fixing points: 3 pcs · Area of application: Tuning
EUR 321.10
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Weight: 337 g · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread)
EUR 110.00
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Color: black · Tension: 12 V · Performance: 60 W · Cable length: 640 mm · Ø inside: 27.5 mm · Ø outside: 90 mm · Ø bolt circle: 80 mm · Number of cables: 4 pcs · Number of fixing points: 6 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 172.00
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Number of fixing points: 10 pcs · Weight: 87 g · Height: 13.5 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
EUR 68.70
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Weight: 100 g · Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 22.80
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Width: 100 mm · Height: 28 mm · Ø mounting hole: 7.5 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Total length: 63 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 349.80
Moped fans also bought
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.10
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.75
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 12.50
EUR 27.78/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Area of application: Tuning · Material: Aluminum · Material: Steel · Ø cable: 7 mm · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Number of fixing points: 6 pcs · Ø mounting plate: 90 mm · Weight: 340 g · Ø Flywheel outside: 71.5 mm · Ø Internal flywheel: 61.5 mm · Mounting type: Screws
EUR 344.10
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Number of fixing points: 10 pcs · Weight: 87 g · Height: 13.5 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
EUR 68.70
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Weight: 100 g · Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 22.80
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 430.10
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Weight: 87 g · Material: Aluminum · Surface: anodized · Color: red · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø outside: 120 mm · Height: 13.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs
EUR 71.70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
