Intake air restrictor with Ø 11 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
| Material | Aluminum |
| Manufacturer | swiing® ingenious parts |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | anodized |
| Color | black |
| Carburetor type | SRE |
| Ø Passage | 11 mm |
| Ø outside | 15 mm |
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 74.20
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 91.30
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 91.30
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Material: Aluminum · Surface: anodized · Color: black · Total length: 17 mm · Manufacturer: swiing® ingenious parts · Ø outside: 15 mm · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRE · Ø Passage: 12 mm
EUR 8.90
Moped fans also bought
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Mounting type: Bride · Mounting type: Plug connection clamped · Filter type: Grille · Ø outside: 61 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Total length: 113 mm · Ø Internal connection: 20 mm · Camouflaged: No · Area of application: Tuning
EUR 14.70
Oil filler plug with sealing ring | Puch Maxi
Drive: Slot · Total length: 14.6 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 2 pcs · Screw head: Lens head · Ø External head: 14 mm · Thread type: M10x1.5 (standard thread) · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.00
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Color: silver · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread length: 12 mm · Total length: 18 mm · Puch OEM number: 901.1053
EUR 4.00
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Thickness: 1.6 mm · Place of use: Carburetor · Place of use: Motor housing · Ø outside: 13.8 mm · Ø inside: 10 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000 · Puch OEM number: 27071
EUR 1.85
Collection only possible with online purchase and appointment.
