Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
| Wheel size | 17 " |
| Mounting type | Nuts & bolts |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Ø mounting hole: 5 mm · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm
EUR 12.50
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 68.70
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 315 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wide intake: 65 mm · Total length: 325 mm · Wheel size: 17 " · Number of fixing points: 5 pcs · Hole spacing: 19 mm · Mounting type: Nuts & bolts
EUR 14.80
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Distance mudguard - center hole: 290 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wide intake: 75 mm · Total length: 305 mm · Wheel size: 16 " · Number of fixing points: 5 pcs · Mounting type: Nuts & bolts
EUR 19.40
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 6 pcs · Mounting type: Nuts & bolts · Total length: 147 mm · Width: 105 mm · Height: 6 mm
EUR 14.80
Not in stock
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Ø mounting hole: 5 mm · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm
EUR 12.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø outside: 5 mm · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2.30
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 12.50
EUR 27.78/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 21.70
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Number of components: 1 pcs · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.75
Not in stock
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Ø cable: 2.2 mm · Color: black · Ø inside: 2.5 mm · Total length: 6000 mm · Ø outside: 5 mm · Coating: none · Area of application: Standard
EUR 13.70
EUR 2.28/m
Hot
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 2200 mm
EUR 11.40
ESJOT sprocket 37 teeth coaster brake galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 37 pcs · Ø inside: 94 mm · Ø mounting hole: 6.5 mm · Thickness: 4.1 mm · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 74 mm
EUR 55.00
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Total length: 165 mm · Material: Plastic · Area of application: Tuning · Color: black · Height: 52 mm · Filter type: Racing screen · Ø Internal connection: 20 mm · Width: 68 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 68.70
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 68.70
Working late? Evening hours on Thursday until 20:00
