Precisely machined wheel bearing cone including dust ring from one piece, suitable for Rücktritt wheel axles with M10.5 x 1 mm fine thread for your moped, moped and small motorcycle.
The corresponding Sachs HR 90 V and HR 905 hubs have been installed on models such as Puch X30 NS / NL, Velux X30, Sachs, Hercules, Pony, Alpa and Zündapp Belmondo, among others.
Thanks to gas nitriding, the Rücktritt cone is hardened and can therefore withstand the highest loads. The raceway is designed for 1/4" (Ø 6.35 mm) balls.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | gas nitrided |
| Width across flats | 15 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Height | 13.3 mm |
| Thread type | MF10.5x1 (fine pitch thread) |
| Puch OEM number | 320.2.41.014.1 |
| Puch |
| Sachs |
| Cilo |
| Hercules |
| Zündapp |
Accessories & related products
swiing® revival Ball Holder 25/37/6.3 Kickbike
Bearing type: Ball ring · Bearing cage: Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.05
swiing® revival Ball Holder 25.5/6.3 Coaster Brake Driver
Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Ø outside: 25.5 mm · Ball bearing closed: No · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 7.90
Not in stock
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Shank length: 95.6 mm
EUR 34.30
Explore categories from Hub & axle
Moped fans also bought
swiing® revival Ball Holder 25/37/6.3 Kickbike
Bearing type: Ball ring · Bearing cage: Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.05
swiing® revival Ball Holder 25.5/6.3 Coaster Brake Driver
Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Ø outside: 25.5 mm · Ball bearing closed: No · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 7.90
Not in stock
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Shank length: 95.6 mm
EUR 34.30
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Shank length: 95.6 mm
EUR 34.30
Working late? Evening hours on Thursday until 20:00
