Brake cam suitable for brake anchor plates on the front wheel of your Puch Maxi S & N moped.
This CNC turned part fits all old brake discs where the brake cams and the brake lever are bolted together.
The galvanized brake cam is in no way inferior to the original SGDG / LELEU brake cams in terms of workmanship and functionality.
Width of square: 9 x 9 mm
Width of diagonal: 6 mm
Total length: 38.2 mm
Thread: M6x1 mm
Material: steel
Surface: galvanized
Complete brake anchor plates, brake shoes and the cam for the rear wheel can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Height | 38.2 mm |
| Thread type | M6x1 (standard thread) |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) |
Ratings
Accessories & related products
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Material: Chrome steel (colloquially known as stainless steel) · Total length: 32 mm · Manufacturer: swiing® revival parts · Number of components: 3 pcs · Drive: Outer edge · Thread length: 13 mm · Ø External head: 14 mm · Thread type: MF10x1 (fine pitch thread) · Shank: Yes · Width across flats: 13 mm · Width across flats: 17 mm · Ø shaft: 9.8 mm · Area of application: Standard · Shank length: 9.5 mm
EUR 14.90
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Ø outside: 91 mm · Total length: 187 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm
EUR 80.70
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Ø outside: 92 mm · Total length: 135 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm
EUR 86.50
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Material: Steel · Color: gray · Manufacturer: KMC · Surface: blank / oiled · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.40
Inox
Hot
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 12.60
Not in stock
Magura cable clamp Ø 8 x 15 mm
Material: Brass · Material: Steel · Total length: 15 mm · Manufacturer: Magura · Ø outside: 8 mm · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm · Thread type: M6x1 (standard thread) · Width across flats: 7 mm · Area of application: Standard
EUR 2.90
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Ø outside: 92 mm · Total length: 135 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm
EUR 86.50
Collection only possible with online purchase and appointment.
