
Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Place of use | left |
| Manufacturer | swiing® revival parts |
| Color | white |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Surface: nickel-plated · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.30
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Surface: burnished · Material lever: Plastic · Thread type: M5x0.8 (standard thread) · Color: black · Total length: 94 mm · Ø inside: 22 mm · Mounting type: Screws · Number of fixing points: 2 pcs
EUR 57.30
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Nipple shape: Pears · Area of application: Standard · Pony OEM number: P0919
EUR 2.75
swiing® revival decorative lever slotted mount left black (Magura)
Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Color: black · Height: 19.6 mm · Total length: 50 mm · Surface: galvanized (blue) · Surface: raw · Place of use: left · Thickness: 1.2 mm
EUR 28.60
Explore categories from Handles & fittings
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Surface: nickel-plated · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.30
Speedometer 60 km/h Ø 48 mm black / chrome
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Color: Chrome · Color: black · Color: red · Color: white · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · Surface: chrome-plated · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread) · Ø Receptacle: 48 mm · Ø outside: 50.4 mm · Depth: 50 mm · Total height: 70 mm
EUR 68.70
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Nipple shape: Pears · Area of application: Standard · Pony OEM number: P0919
EUR 2.75
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø inside: 86 mm · Total length: 250 mm · Color: sand-colored · Width: 170 mm · Thickness: 0.4 mm · Number of components: 1 pcs · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 6.75








