Securing plates made of stainless steel for securing sprockets with 5-hole mount and 72° pitch on your moped / moped with Grimeca hub.
The pre-stressed plates are used to secure the bolts on the sprocket. During assembly, two plates must be placed on top of each other. The locking tab on the lower plate must be cut off or knocked straight.
Number of plates: 3 pcs.
Thickness: 1 mm
Pitch: 72°
Pitch circle: 115 mm
Number of fixing points: 5 pcs.
Material: Chrome steel (stainless steel)
Matching sprockets and screw sets can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (known as Nirosta®) |
| Number of lobes | 6 pcs |
| Thickness | 1 mm |
| Ø bolt circle | 115 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Color: gray · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 21.30
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24.70
EUR 2’470.00/l
ESJOT sprocket 51 teeth Grimeca (5-hole) galvanized
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 51 pcs · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Number of fixing points: 5 pcs · Color: silver
EUR 44.90
ESJOT sprocket 45 teeth galvanized Grimeca (5-hole)
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 45 pcs · Ø bolt circle: 115 mm · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Number of fixing points: 5 pcs · Color: silver
EUR 44.90
ESJOT sprocket 41 teeth Grimeca (5-hole)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Surface: galvanized (blue) · Number of teeth: 41 pcs · Material: Steel · Color: silver · Ø mounting hole: 6.5 mm · Ø bolt circle: 115 mm · Ø inside: 98 mm · Number of fixing points: 5 pcs · Cranking (offset): 8 mm
EUR 44.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Thread length: 7 mm · Width across flats SW: 7 mm · Area of application: Standard
EUR 2.80
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Width: 17 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
EUR 11.20
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Thread length: 24 mm · Total length: 34 mm · Width across flats nut: 8 mm
EUR 2.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.25
Magura set screw M5x34 mm
Manufacturer: Magura · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Ø cable holder: 2.55 mm · Thread type: M5x0.8 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Thread length: 24 mm · Total length: 34 mm · Width across flats nut: 8 mm
EUR 2.80
Handlebar stem 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Ø outside: 22 mm · Height: 350 mm · Color: Chrome · Clamping diameter: 25 mm · Width: 710 mm · Mounting type: Front boom mounting · Length handlebar ends: 140 mm · Crossbar: Yes
EUR 38.80
Collection only possible with online purchase and appointment.
