Stylish racing exhaust with attached muffler suitable for various Puch mopeds / mopeds.
The raw steel exhaust is sealed with heat-resistant clear lacquer. This gives your racing moped an even more radical look. In addition, the tuning muffler also delivers the performance that it promises with its appearance.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery. Replacing the screws changes the exhaust back pressure and thus the performance of the silencer. This gives you an exhaust for the lower, middle and upper speed range in one!
Ø Flame tube: 28 mm
Ø Flame tube inside: 25 mm
Hole spacing: 43 mm
Fixing hole: 6.2 mm
Total length: 900 mm
Alternative racing tailpipes and the required mounting material can be found under accessories.
Branded product from the Portuguese manufacturer TECNO.
| Ø outside | 90 mm |
| Manufacturer | TECNO |
| Material | Steel |
| Surface | varnished |
| Color | gray |
| Total length | 900 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 25 mm |
| Number of fixing points | 2 pcs |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Welded lug |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Thickness: 3 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8.50
Hot
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Ø Silencer: 50 mm · Flame tube attachment: Stud bolts & nuts · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Mounting type: Tab · Total length: 900 mm
EUR 332.60
Not in stock
Explore categories from Exhaust system
Moped fans also bought
Hot
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Ø outside: 61 mm · Filter type: Grille · Total length: 113 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No
EUR 14.80
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Surface: raw · Color: black · Place of use: Carburetor · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Number of components: 1 pcs · Area of application: Standard · Sachs OEM no.: 0250 160 101 · Pony OEM number: A4281
EUR 3.30
swiing® revival nozzle set M4 (50 - 60) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle thread: M4x0.7 (standard thread)
EUR 25.10
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Thickness: 3 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8.50
Working late? Evening hours on Thursday until 20:00
