The use of the wear-free wire thread inserts not only repairs the thread, but also increases the thread load-bearing capacity.
Application:
1. Drill out the defective thread with the enclosed drill
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special tap.
4. Turn the thread insert into the holding thread.
5. Remove the tang with the tang breaker.
An illustrated instruction with English explanation is included in the set.
Scope of delivery:
- 1 pc. twist drill
- 1 pc. Thread tap
- 1 pc. Installation tool
- 1 pc. Tang breaker
- 15 pcs. Wire thread inserts (1.5D)
Other useful tools for thread repair or as a helicoil replacement can be found in the accessories section.
| Storage method | Plastic box |
| Material | Steel |
| Nominal diameter (thread) | 10 mm |
| Dimension thread insert | 1.5D |
| Number of components | 20 pcs |
| Thread type | MF10x1 (fine pitch thread) |
| Total length | 15 mm |
| Area of application | Workshop accessories |
Ratings
Accessories & related products
HeliCoil thread repair set M6 (professional tool)
Number of components: 60 pcs · Manufacturer: HeliCoil · Material: Chrome steel (colloquially known as stainless steel) · Surface: coated · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Thread type: M6x1 (standard thread) · Ø bore: 6.3 mm · Nominal diameter (thread): 6 mm · Storage method: Suitcase · Total length: 6 mm · Total length: 9 mm · Total length: 12 mm · Storage box dimension [mm]: 180 x 165 x 45 mm · Area of application: Workshop accessories
EUR 89.10
Not in stock
Repair kit spark plug thread M14x1.25
Material: Steel · Area of application: Workshop accessories · Surface: burnished · Surface: galvanized (blue) · Thread type: MF14x1.25 (fine pitch thread) · Ø outside: 17.4 mm · Ø bore: 14 mm · Storage method: Plastic box · Nominal diameter (thread): 14 mm · Total length: 11.3 mm · Number of components: 16 pcs · Total length: 17.5 mm · Total length: 70.4 mm · Storage box dimension [mm]: 19 x 105 x 40 mm
EUR 63.40
Explore categories from Screws & fastener sets
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 21.10
swiing® revival exhaust nut M35x2 galvanized | Sachs 50/2 (A1507)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Thread type: M35x2 (standard thread) · Ø outside: 43 mm · Ø inside: 30 mm · Pony OEM number: A1507 · Sachs OEM no.: 0242 048 101
EUR 16.60
Not in stock
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 17 mm · Total length: 116 mm · Width: 86 mm · Height: 99 mm · Mounting type: Stud bolts & nuts · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Area of application: Standard · Area of application: Tuning · Vacuum connection: Yes · Choke control: without choke · Nozzle thread: MF7x0.75 (fine pitch thread) · Nozzle size: 76 · Hole spacing inlet: 31 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 89.10
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Surface: coated · Place of use: Pinion shaft · Area of application: Standard · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Width: 3.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8.35
Collection only possible with online purchase and appointment.
