Water decal "Rixe" silver large

Nut flywheel M10x1 SW15 serrated

Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Height: 10.5 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon · Ø outside: 19.8 mm · Width across flats: 15 mm

Seat tube Ø 30 mm | Puch Maxi

Ø Saddle tube holder: 22 mm · Color: Chrome · Material: Steel · Surface: chrome-plated · Total length: 245 mm · Length of holder: 45 mm · Clamping diameter: 22 mm · Ø outside: 30 mm

GPO 85° Carburetor Elbow M6x0.75

Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 85 ° · Ø outside: 6 mm · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000

Eurol ball bearing grease 110 g

Manufacturer: Eurol · Temperature resistance (min.): -30 - 120 °C · Area of application: Chemistry · Area of application: Fat · Contents: 110 g

"CM" mark for operating license

Material: Polyvinyl chloride (PVC) · Color: red · Color: white · Width: 48 mm · Height: 22 mm · Rear side texture: Adhesive · Place of use: Frame (+ tank) · Transferfolie: No

Decorative line black 2 mm

Manufacturer: Made in Germany · Material: Polyvinyl chloride (PVC) · Color: black · Width: 2 mm · Rear side texture: Adhesive · Total length: 2500 mm · Place of use: Frame (+ tank) · Transferfolie: No

Karcoma O-ring 12.5/16/2 Fuel Valve M12x1.5

Manufacturer: Karcoma · Material: Fiber · Ø inside: 12.5 mm · Thickness: 2 mm · Ø outside: 12.5 mm

GPO control bearing set | Sachs / Solex

Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø mounting frame: 30.05 mm · Ø inside: 26.85 mm · Thread type: FG25.4 (1" 24G)

GPO 70° carburetor pipe bend M6x0.75

Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Height: 36 mm · Height: 37 mm · Total length: 35 mm · Total length: 41.5 mm · Internal thread: M5x0.8 (standard thread) · Angle: 70 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread)

Rixe sticker Sachs tank (165 x 18 mm)

Material: Polyvinyl chloride (PVC) · Width: 165 mm · Height: 18 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: No