Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Details
| Manufacturer | Xtreme |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Mounting type | Nuts & bolts |
| Adjustable | Yes |
| Ø outside | 44 mm |
| Ø Fastening inside | 10 mm |
| Ø spars | 28 mm |
| Hole spacing | 260 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.10
EUR 2’510.00/l
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 260 mm
EUR 57.10
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Thread type: M6x1 (standard thread) · Manufacturer: Magura · Material: Brass · Material: Steel · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Thread length: 7 mm · Width across flats SW: 7 mm · Area of application: Standard
EUR 2.85
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Color: Chrome · Color: black · Color: transparent · Housing material: Metal · Lens material: Plastic · Surface: chrome-plated · Surface: varnished · Width: 134 mm · Height: 147 mm · Bulb holder: BA15d · Speedometer recording: None · Switch included: No · Battery operated: No · Ø outside: 130 mm · Number of fixing points: 2 pcs · Depth: 80 mm · Mounting type: Screws · Thread size: M6 · Area of application: Standard
EUR 28.50
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.30
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: silver · Drive: Slot · Drive: Triangular head · Surface: galvanized (blue) · Surface: raw · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 14.80
Collection only possible with online purchase and appointment.
